![](https://cdn.theknightrider.com/wp-content/uploads/2024/05/boarder_semi_40wheel_top.webp)
SEASON 1 LOWER CONSOLE
Replace the provided inaccurate season 4 console with a proper 3 piece Season 1 lower console upgrade with built in dash support. Featuring transparent buttons that can be lit up with an led, it can be mounted with original hardware or use our included coinvent 3M double sided tape (the yellow seen in the video) to securely adhere this piece to the center console of your build. This 3D print is made from UV resin, air brushed satin black, and sealed in a matte clear coat. Fit’s the K2000 build from Fanhome, DeAgostini, and Altaya 1:8 scale models. Please scroll down for more product information, screen shots, and video.
Additional information
Weight | 1 oz |
---|---|
Dimensions | 6.5 × 3.75 × 1.5 in |
![](https://cdn.theknightrider.com/wp-content/uploads/2024/05/boarder_semi_divider.webp)
Season One Lower Console Upgrade
This lower console was designed by the ever talented Pedro Santamaria, and is based on the season 1 lower console as seen in the show. It's an assembled three piece part, including transparent buttons that are air brushed with the proper transparent paints that allow and LED to light it up, and a hand painted keypad. If you're looking for a more accurate looking upgrade for your Fanhome build, then you've definitely come to the right place!
* Note, I do not own the rights to the STL's and can not sell them directly to you. I've linked Pedro's Facebook account, you can contact him for pricing and purchase instructions. For this reason, I can only offer this as a finished or DIY product.
Pedro Santamaria has absolutely captured the iconic look of the first season lower console with stunning accuracy. These lower console upgrades come air brushed in matte black, sealed with matte gloss, and also come with pre-installed 3M double sided sticky adhesive for an easy to install upgrade. Optionally (and recommend for best results) you can use the original mounting hole and hardware provided with the kit to hold the piece in place for a more permanent fit.
These parts are made from a custom UV resin formula consisting of SIRAYA Blu, SIRAYA Smokey Black ABS Like Resin, and SUNLU ABS Like Gray. My smaller parts are designed to be able to have some flex, while larger items have an ABS like strength to them, and can withstand a drop from a 4-5 foot height and not break or shatter.
This mod fits:
![](https://cdn.theknightrider.com/wp-content/uploads/2024/05/boarder_semi_right.webp)
jmmihaljevic (verified owner) –
Once again awesome detail!!! Thank you for feeding my obsession!!!
raflogothe (verified owner) –
Top Notch Quality. Highly Recommended!